Deep peascod form. Plain inward turned rolls at the neck, arms and at the base of the flair. Point relatively flat but drawn out to a narrow point. Holes for rivets along the edge of the flair. Rough from the hammer finish. Fitted with two pegs for shoulder straps and a paur of winged turning pins. Suggesting that it has been refitted for use in more than one configuration.
Measurements: 13 3/4 in. wide below the arm holes, 11 3/8 in. wide at the waist, overall 18 1/4 in. tall. 6 1/2 in. tall from waist to under the arm. Fauld flair 1 3/4 in. long. Thickness .17 in. at the neck, generally .12-.15 in. at the center and tapering to .-08-.09 in. at the sides. The central 11 inches (5.5 on each side) is .1 or greater, varying between .1 and .125 along at line 5 inches from the sides. The thick area near the neck is relatively small, small parts of it are .185. Neck roll .316 tall at the center tapering .2 at the end.
If you have any questions, please send them to Wade Allen
This site last updated Sun Apr 19 19:28:35 EDT 2020