Items in the Armour Research Society Study Session

Armour

South German  Burgonet

South German Burgonet circa 1540

One piece skull formed with four triangular panels rising to a near pyramidal point, fitted with fixed peak and neck guard each with recessed border and finely roped edge. With a pair of simple cheek plates. A burgonet of similar form and struck with the mark of the Vienna City arsenal is preserved in the Fitzwilliam Museum Campridge (inv. number HEN.M.80-1933). [inv. num. A-115]

German Burgonet

German Burgonet 16th cent (late)

Of "Black and White" form with recessed bands on each side of the skull. High, roped comb. Neck plate and brim formed of separate plates, each with rolled, recessed and roped borders. Cheek plates with flared bottom (conforming to the neck plate), raised circle in the center and a raised edge at the face openning. Signs of delamination as is common with authentic pieces. Includes original patch at the tail flair and 2 rivets to stabilize laminations at the forhead. Extremely fine roping on the rolls. Right cheek plate replaced. Remains of original finish. Overall oxidized surface. Small holes in the comb. [inv. num. A-52]

German Burgonet

German Burgonet 16th century

One piece polished skull. Nuremberg guild mark. This helmet retains its original plume holder. Provenance: Bischoff Collection, Vienna. [inv. num. A-5]

Morion

Morion circa 1580-90

Morion. Formed in one piece with a high roped comb, the base of the skull encircled by lining rivets on brass washers, down-turned brim acutely drawn-up to sharp points, and fluted border with roped edge turned over wire. The comb with small lamination hole. Light pitting. [inv. num. A-106]

German Morion

German Morion circa 1600

Black and white. Typical of the Munich town guard. 2 piece bowl with a high comb. Brim with prominent upturned points at the front and back. Each side embossed with a large fleur-de-lys. Provenance: Ackermann Collection, Luzerne. [inv. num. A-6]

Tournament Visor

Tournament Visor circa 1550

Tournament visor. [inv. num. A-101]

Italian or Flemish Breastplate

Italian or Flemish Breastplate circa 1500

Formed of a single piece with a medial crease, flaired bottom edge and large triangular rolls at the arms and neck. The roll at the arm with engraved/filed decoration in the form of lines. There are a set of holes on the right side for the attachment of the pins for a lance rest. This is a fine example of a rare type of breastplate made at the turn of the 16th century. Examples like it may be found in the Waffensammlung Vienna, Metropolitan Museum NY, etc. For a very similar example see Kienbusch Collection in the Philadelphia Museum of Art #1977-167-132 formerly in the Dean collection.The metal varies in thickness. Within an inch it can vary about .01 inch. All measurements in inches. Thickness measurements:Sides - .028-.052 - mostly in the .030-.040 range. Upper area between arm and neck (right side) - .035-.050.Mostly around .040. Same thing (left side) - .059 - .075 (thicker than the other side). At the lance rest holes - .040 - .052. At the top crease area - .070 - .080 (mostly .080). At the center near crease - .080 - .11. Center near the waist - mostly .040 - .050. Height of upper roll at the center - .66. Max height of right arm roll - .84. Max height of left arm roll - .71. Size measurements: Width of neck hole - 8 1/2 in. Height of arm hole - 9 in. Arm hole to waist- 4 1/2 in. Center from top of roll to waist - 12 3/4 in. Waist flare - 3/4 in. [inv. num. A-66]

Lower-German Breastplate

Lower-German Breastplate circa 1550-1560

Heavy hammered polished iron breast plate with strong projection in the medial ridge and triple extruded curved V-lines under a centrally subdivided roped flange. The left side etched (faded) with a crucifix and kneeling knight. Inset gussets with high roped turnovers. Riveted tace. The inside with distinct hammer traces, the iron slightly raised in places, the double holes for the lance rest filled in the distant past. Height 32 cm. Rivets replaced. [inv. num. A-61]

German  Breastplate

German Breastplate circa 1550-60

Breastplate. Black and white. Sliding gussets at the arm holes and 2 fauld lames. Drawn out to a blunted point somewhat below center. Rolls at the neck and arm holes tapering from the center and roped. Background rough from the hammer and painted black. Bands raised and polished. Central band tapering toward the waist on both the breast and fauld lames. One raised band on each side. Top of breastplate with wide scalloped raised area. Lower fauld lame with central arch cut out and rolled and roped edge. All parts originally part of the same piece. Buckles at the shoulder end of the arm gussets. Painted number 3946 in large numbers on the inside of the breast. A nice, basic, munition black and white breastplate from the mid 16th century. [inv. num. A-107]

German Black and White Cuirass

German Black and White Cuirass circa 1580-90

Comprising a heavy peascod breastplate with roped flanges at the neck and sliding gussets, the lower edge flanged for a skirt of 2 plates, the bottom one arched, turned and roped at the center, and matching three part backplate with separate riveted culet, the edges turned and roped, the surfaces throughout divided by bright bands and borders into blackened panels, rough from the hammer, and struck near the neck on both breast and back with the Nuremburg mark and a maker"s mark of a pair of shears in an inverted shield. The waist belt is a modern replacement. The shoulder straps are also replacements, though one is lacking. 5 of the 6 straps for the suspension of tassets remain and they are secured by 8 lobed roset washers. The fauld lames are slightly deformed. The right gusset, breastplate and both fauld lames are marked with a chiseled "X" assembly marks - the left gusset is different - possibly due to its having been for the left (it fits and matches the right in every respect). [inv. num. A-19]

Italian Backplate

Italian Backplate circa 1560-80

Good form, designed for use without a fauld. Arm, neck and bottom edges with rolled and slightly roped borders. Arm and neck rolls formed over wire, the roll on the waist flair is smaller in diamer and shows no sign of ever having wire inside. Raised decorative bead running parallel to the arm holes and along the neck (descending at the center of the back). The decorative bead also roped. Engraved line at center - along the backbone. Rusted and cleaned. Height (inside, neck hole to waist flair) 14 3/8 inches, width under arm holes 14 inches (narrowing to 13 1/4 at the very front edge), width at waist 11 inches, width of neck hole app. 9 1/2 inches, width at top 12 1/8 inches, the waist flair mostly app. 3/4 inch wide, narrowing at the center to 1/2 inch. [inv. num. A-21]

Gauntlets

Gauntlets late 15th cent.

Gauntlets. Nicely formed "gothic" gauntlets typical of the late 15th century. Fluted, engraved and pierced overall. Formed of a large metacarpal plate joined to a wrist lame by another, smaller lame. The cuff is also attached to the wrist lame. These plates are attached with sliding rivets allowing the wrist to flex in all directions. The knuckle plate is formed into a blunt point over each knuckle. The fingers are covered by 4 articulated plates fluted over each of the fingers. These gauntlets have been cleaned and re-assembled, but they are basically a complete pair of gauntlets. The thumbs have been restored and the left cuff is associated. [inv. num. A-98]

German Gauntlet (part)

German Gauntlet (part) circa 1490-1500

Finger, knuckle and 1 1/2 metacarpal plates of a german gothic mitten gauntlet. The finger lames are fluted so simulate fingers, the knuckle plate with rounded and creased knuckles. The first metacarpal plate is fluted with v-shaped puckers to accomadate the flutes in the knuckle and finger lames. There is half of the hinge used to attach the thumb plate, and half of the second metacarpal plate remaining. Each of the articulations is formed with sliding rivets. 2 rivets have been lost, the parts held together by bolts. Formerly in the collection of Leonard Heinrich - armourer to the Metropolitan Museum of Art, NY. [inv. num. A-47]

German Gauntlets

German Gauntlets circa 1510

Gauntlets of steel. Very early "Maximillian" form. Narrow cuff of close-fitting form. Inner plate opens on a hinge and spring-pin. Recessed border and simple spray of flutes. Metacarpal of 3 narrow lames and one larger lame near the knuckles. Knuckle plate formed with a rounded ridge over each knuckle. Base of the fingers covered by 2 mitten plates. The large metacarpal and final finger plates are fluted in a "V" to fit to the knuckle plate. The base of the thumb covered by a plate hinged to the main metacarpal plate. Remainder of the thumb covered by a series of overlapping plates rivetted to a leather base. The form of the finger covering is a simple form that would have been used in lower quality or infantry armours. The main form of the gauntlets is similar to the pair of gauntlets on a harness in the Waffensammlung of the Kunsthistorisches museum in Vienna - illustrated on plate 104 (harness described on page 228-9). Cleaned. Small thumb plates, rivets and most leathers restored. [inv. num. A-100]

German black and white mitten gauntlets

German black and white mitten gauntlets circa 1530-50

Short, almost straight cuffs formed of 2 plates rivited together. Cuff with rolled, roped and recessed border. Black surface rough from the hammer. White areas raised and ground smooth. Back of the hand formed of 5 plates. Knuckle plate fromed with a raised and roped ridge. Fingers covered by 5 articulated plates. [inv. num. A-26]

German Gauntlets

German Gauntlets 2nd half 16th century

Pair of gauntlets of steel painted black, each with pointed flared boxed cuff made in two-pieces with bright turned and roped borders along the outside followed by a double flute with central cusp on the inside, and each struck with a Nuremberg mark and indistinct maker"s mark, "H" in a shield, roped boss over the ulna, five metacarpal plates above three finger-plates below, each of the latter with bright embossed and roped knuckle-plate and all articulated on rivets, the lower plates each with border en suite with the cuff, one with keyhole piercing engaging with a locking-stud on the inner wrist-plate, separate hinged thumb-defences of four plates each, and each incised with roman numeral assembly marks on the inside from "I" on the cuff to "XII" on the terminal plate. 36 cm. and 38 cm. long. [inv. num. A-99]

Italian Gauntlets

Italian Gauntlets circa 1550-1580

A pair of fingered gauntlets. Pointed cuffs of one piece with a central crease and joined at the inside of the wrist by 2 flush rivets. The seam stepped so that the outside is flush. The cuff is flaired evenly thoughout its length. The outer edge of the cuff is bordered by a roped inward roll and a recessed border. The border includes a raised central ridge. The roll, central ridge and recessed border with single engraved lines. The back of hand is formed of 4 narrow plates toward the wrist and one wider plate at the knuckle. Each of the plates has a central crease with a notch in the edge aligned with the crease and a pair of incised lines parallel to the visible edge. The ends of the metacarpal plates have a shallow semi-circular extension with a small notch cut at the end of the extension. The extension allows the rivets to be mostly aligned with the edge of the plates. The knuckles are covered by a single plate with a central raised and roped ridge and the outer edge is shaped to the fingers. Thumbs of one large plate with a raised central tear-drop and scales covering the thumb. The main thumb plate is attached to the larger metacarpal plate by a hinge with one rivet on each end. The metacarpal plates are slightly boxed. Small finger and thumb plates replaced. Fingers re-leathered. Rivets replaced. Cleaned over-all. Cuff at the wrist roughly three and one half inches in diameter. Outer edge of the cuff tear-drop shaped 6 inches by 5 one half inches. Cuff 5 inches long at the point and 2 inches long at the inside of the wrist. Metacarpal app. 4 inches across at the knuckle plate. [inv. num. A-46]

South-German Tassets

South-German Tassets mid 16th century

For a half armour. Seven lames, the upper four detachable. Creased center line. Hammered floral decor, turned and roped edges, lateral double decorative lines. Decorative file work at the centers of the tops of the lames. Very nice, full form. Old leathers (one detatched from one plate). Old rivets and matching buckles (some tongues defective). [inv. num. A-62]

Greaves and Sabatons

Greaves and Sabatons circa 1580

The greaves formed of two plates front and back formed to the leg hinged on the outside and secured by pins on the inside. Each with a sabaton of 9 plates (4 small plates overlapping a larger center plate then 3 smaller and terminal plate overlapping the central plate in the other direction) with terminal plate of boxed form turned over at the front and sides. Main plates creased at the center of the front and back. Sabatons creased at the center of the 4 plates closest to the greave, the crease ending in the main central plate. Small inward-turned, roped rolls formed around a wire at the bottom of the greave plates and very small, fine outward turned roll at the top of the back plate (behind the knee). The rear plate pierced with a hole for the spur. An additional plate rivetted into the inside of the plate to provide a threaded attachment for the spurs. 2 hinges on the outside of each greave. Hinges fully wrapped. The barrels cut into 4 sections (2 on each side). The ends rounded and filed to form simple flowers. Stamped with curved accents to emphasize the shape. Attached to the front and rear by one rivet each. Sabaton plates attached by sliding rivets at each side and originally 2 leather straps (one on each side of the instep, most of the inner remaining on both). Remains of leather strap in the base of the toe plate to secure sabaton to the shoe. 18 in. tall. Sabaton 11 3/4 in. from the back of the heel to the front of the toe. 80 painted inside the back plate of the right greave. From the George F. Harding Collection [inv. num. A-124]